BPA Call GS06F7WKSW-GSMPNE2B4085

This federal contract award, with an ID of 47QSHA21A000D|47QSSC24FFC6S, is for the procurement of a manual torque wrench multiplier by the Federal Acquisition Service, a civilian agency. The award, with a ceiling value of $7,274.80, was made to Wright Tool Company, LLC, a for-profit limited liability company based in Warren, Michigan. The torque wrench multiplier has an overall length of 20 inches, a 1/2 inch square drive, a 1 inch internal square drive, and a torque capacity of 220 to 2200...

This is a federal contract awarded by the General Services Administration (GSA) to Wright Tool Company, LLC, a for-profit limited liability company based in Warren, Michigan. The contract is for the delivery of a torque multiplier tool, with a maximum overall length of 19 inches, height of 7-43/64 inches, and width of 13 inches. The tool has a 3/4-inch square drive on both ends and a rated torque capacity of 12,000 foot-pounds, with a gear ratio of 10.7:1 and a minimum hardness rating of 38...

The U.S. Air Force Materiel Command awarded a $977,765 firm fixed-price definitive contract to A.k.o. Inc., doing business as Torque Specialties, on July 31, 2024, for the procurement of a Torque Multiplier Calibration System and Kit in accordance with Purchase Description 24M-232A-TQ Revision 2. The contract was awarded through full and open competition with no set-aside designation and represents a non-small business set-aside procurement under NAICS code 334516. The system will be performed...

K5 Defense LLC has been awarded a firm fixed price purchase order by the General Services Administration Federal Acquisition Service for the delivery of a torque multiplier. The $21,096 contract calls for K5 Defense to provide a torque multiplier measuring 19 inches in length with a maximum rated torque capacity of 12,000 foot-pounds, 7.675 inches in height, and 13 inches in maximum width. The torque multiplier will have a 3/4 inch nominal input drive on both ends, an 11:1 gear ratio, and a...

The U.S. General Services Administration (GSA) Federal Acquisition Service has awarded a firm fixed price purchase order to Kipper Tool Company, a certified Woman-Owned Small Business (WOSB), for the delivery of a torque multiplier. The item has a maximum overall length of 19 inches, a maximum height of 7-43/64 inches, and a maximum width of 13 inches, with a 3/4-inch square drive on both ends. The torque multiplier has a rated capacity of 12,000 foot-pounds and a gear ratio of 10.7:1, with a...

This is a fixed-price contract with economic price adjustment awarded by the Federal Acquisition Service (FAS), a civilian agency, to Wright Tool Company, LLC, a for-profit limited liability company located in Warren, Michigan. The contract is a Blanket Purchase Agreement (BPA) call under the RC2 Blanket Purchase Agreement, which allows federal agencies to procure tools and supplies on an as-needed basis. The contract is for the delivery of a manual torque multiplier with specific technical...

The U.S. General Services Administration's Federal Acquisition Service awarded a delivery order to Idsc Holdings LLC, doing business as Snap-On Industrial, for a torque multiplier (Snap-On Inc. P/N JHWTM-393) with a ceiling value of $2,076.98. The contract employs a fixed-price with economic price adjustment pricing structure and carries an ultimate completion date of January 14, 2026. The award was issued without a set-aside designation and will be performed in Kenosha, Wisconsin. Snap-On...

The General Services Administration (GSA) awarded Kaufman Company, Inc. a $1,778.77 firm fixed price purchase order to deliver a torque multiplier. The torque multiplier will have an overall length of 25 inches, a square drive size of 3/4 inch, gear ratios of 4 to 1, and a torque capacity of 2,000 foot-pounds. Materials will be steel and coatings will be chrome. Performance will occur in Norwood, Massachusetts over a period of approximately 3 months from November 2023 through February 2024. No...

<p>Kaufman Company, Inc. has been awarded a firm fixed price purchase order totaling $5,719.51 to deliver a multiplier kit, torque wrench, or equal product as specified by part number SWE221 under the original solicitation. The General Services Administration Federal Acquisition Service will serve as the contracting agency. Performance will take place in Norwood, Massachusetts with all work due for completion by March 24, 2024. No set-aside designation was applied to this procurement.</p>

This contract was awarded by the U.S. government to Cooper Industries Inc. for the delivery of a Wrench Assembly Torque Multiplier. The contract has a total ceiling value of $11,656.80 and is a Delivery Order under a larger contract vehicle. The contract does not have a set-aside designation. The contract was awarded on April 4, 2005 with an ultimate completion date of May 22, 2005. The place of performance is South Carolina, USA. No additional subcontractors are mentioned in the provided...